Vehicle Profiling Applications

Non-contact car sensing is used in applications for vehicle detection. Car detection sensors need to reliably detect vehicles in the installed environments. MaxSonar ultrasonic sensors have a long range so mounting and concealment is easier, giving the project a professional installation.

To read about this application, click here

Sensors For All Environments

Try These First!

MB7360 Ultrasonic Sensor
ANPWSerial

MB7360 Ultrasonic Sensor

Refresh rate of 7.5Hz, filtering rate of 1.5Hz. 1mm resolution with a calibrated accuracy. Determines the range to the first detectable target in a narrow beam. Sensor can easily be used in multi-sensor installations.

MB7060 Ultrasonic Sensor
ANPWRS232

MB7060-300 Ultrasonic Sensor

Refresh rate of 10Hz. 1cm resolution, determines range to the first detectable target in a narrow beam. Multiple sensor installations require chaining or triggered firing. For I2C, please see the MB7040.

MB7364 Ultrasonic Sensor
I2C

MB7364 Ultrasonic Sensor

Similar to the MB7360 with an increased sensitivity for small, soft, or angled targets.

HRXL-MaxSonar-WR Line
ANPWSerial

HRXL-MaxSonar-WR Line

The HRXL-MaxSonar-WR sensors feature a 1mm resolution and 7.5Hz read rate for accurate vehicle profiling of most shapes. This makes this series ideal for car washes where the machine moves around the vehicle for a touchfree wash.

I2CXL-MaxSonar-WR Line
I2C

I2CXL-MaxSonar-WR Line

I2C interface for easy wiring. This sensor has an update rate up to 40Hz, 1cm resolution.

HRXL-MaxSonar-WRS Line
ANPWSerial

HRXL-MaxSonar-WRS Line

Refresh rate of 6.67Hz, Filter rate of 1.33Hz. 1mm resolution with a calibrated accuracy. Determines the range to the first detectable object in a narrow beam. Has higher sensitivity than the MB7060 or MB7360. This sensor can easily be used in multi-sensor installations.

Sensors For Protected / Indoor Use

Try These First!

MB1220 Ultrasonic Sensor
ANPWRS232

MB1220 Ultrasonic Sensor

Has a refresh rate of 10Hz, 1cm resolution, determines the range to the first detectable target in a wide beam. Has a higher sensitivity than the WR and LV models making it better to detect small, angled, or off-axis targets. Multi-sensor installations require chaining or triggered firing. For I2C, please see the MB1222.

MB1010 Ultrasonic Sensor
ANPWRS232

MB1010 Ultrasonic Sensor

Lowest priced model. Our best selling sensor. Has a refresh rate of 20Hz. 1inch resolution determines the range to the first detectable target in a wide beam. Has higher sensitivity than the WR models. Multi-sensor installations require chaining or triggered firing.

XL-MaxSonar-EZ Line
ANPWRS232

XL-MaxSonar-EZ Line

Has a refresh rate of 10Hz. 1cm resolution determines the range to the first detectable target in a wide beam. Has a higher sensitivity than the WR and LV models making it better to detect small, angled, or off-axis targets. Multi-sensor installations require chaining or triggered firing.

Table Legend

Interface Abbrv
Digital High/Low Logic
Analog Voltage AN
Pulse Width PW
4-20mA Output 4-20
Analog Envelope AE
I2C Bus I2C
USB Connector USB
RS232 Serial RS232
TTL Serial TTL
RS232 or TTL Serial Serial

Is your preferred interface not mentioned? Contact us!