Sensors For All Environments
Try These First!
MB7560 Ultrasonic Sensor
Designed for applications where condensation occurs on the sensor. This sensor features a self‑cleaning transducer face, 1mm resolution, calibrated accuracy, and large target filter. Multi-sensor installations require chaining or triggered firing.
4-20HR-MaxSonar-WR Line
4-20mA output for industrial wiring. 1.6mm resolution, and calibrated accuracy. Other features vary by model and product line.
4-20SC-MaxSonar-WR Line
Designed for applications where condensation occurs on the sensor. This sensor features a self‑cleaning transducer face, 4-20mA output for industrial wiring. 1.6mm resolution, calibrated accuracy, and large target filter. Other features vary by model and product line.
SCXL-MaxSonar-WRS Line
Higher sensitivity than the standard SCWR products. This may be required when detecting soft or angled targets. Initial tests should be performed with lower sensitivity sensors as high gain may cause unwanted side detections.
MB7460 Ultrasonic Sensor
A good sensor to test first for bins that require a 4-20mA interface and low condensation occurs.
MB7760 Ultrasonic Sensor
A good sensor with self-cleaning to test for bins that have strong amounts of condensation occurring and a 4-20mA interface is required.
MB7389 Ultrasonic Sensor
Designed for tank level measurement with low amounts of condensation or icing. Sensors can easily be used in multi-sensor installations.
Sensors For Protected / Indoor Use
Try These First!
MB1220 Ultrasonic Sensor
Great for users who want to determine the range to people or other objects to distances of ~10 feet. 10Hz refresh rate.
MB1010 Ultrasonic Sensor
Our best selling sensor. Great for users who want to determine the range to people or other objects to distances of ~8 feet. 20Hz refresh rate.
LV-ProxSonar-EZ Line
Proximity version of our best selling product. Designed for applications that only want to monitor if a target is within a defined distance with even simpler integration. (T/F output can drive software switches or other electronics.) Great for people counting and automatic switches.
USB-ProxSonar-EZ Line
Similar in function to the LV-ProxSonar sensors. These sensors feature an easy to use USB connection. Great for distributed IT networks and for a quick proof of concept from engineering. Uses the same Micro-B USB connection as many modern cell phones.
Other Sensors to Try
MB1200 Ultrasonic Sensor
The MB1200 is a great sensor for applications that require long range people detection. This sensor can detect people to ~17 feet. 10Hz refresh rate.
MB1210 Ultrasonic Sensor
The MB1210 is capable of detecting people to ~12 feet. This is great for users who need the range capability of the MB1200 but want a narrower detection area than the MB1200. 10Hz refresh rate.
MB1240 Ultrasonic Sensor
The MB1240 offers the narrowest detection zone and the greatest noise tolerance. Determines the range to people out to ~4 feet. 10Hz refresh rate.
HRUSB-MaxSonar-EZ Line
USB interface with a 1mm resolution and calibrated accuracy. Great for fast engineering in quick-to-market people detection and sizing applications. Sensor can easily be used in multi-sensor installations.
Table Legend
| Interface | Abbrv |
|---|---|
| Digital High/Low | Logic |
| Analog Voltage | AN |
| Pulse Width | PW |
| 4-20mA Output | 4-20 |
| Analog Envelope | AE |
| I2C Bus | I2C |
| USB Connector | USB |
| RS232 Serial | RS232 |
| TTL Serial | TTL |
| RS232 or TTL Serial | Serial |