MB7961 Power Supply Filter

Power filter kit for all MaxSonar Products

Product Description

The power supply filter kits includes a 10ohm resistor, a 100ohm resistor, and a 100uF capacitor. The power supply filter is recommended for environments with unclean power or electrical noise. Electrical noise may cause unstable range readings on MaxSonar products. The power supply filter helps clean unstable or dirty power supplies that may cause a MaxSonar sensor to have unstable range reports.

Product Specifications

Compatibility

The MB7961 Power Supply Filter is compatible with the following sensors:

  • HRLV‑MaxSonar‑EZ
  • HRXL‑MaxSonar‑WR
  • HRXL‑MaxSonar‑WRC
  • I2CXL‑MaxSonar‑WR
  • I2CXL‑MaxSonar‑WRC
  • LV‑ProxSonar‑EZ
  • LV‑MaxSonar‑EZ
  • XL‑MaxSonar‑EZ
  • EZ‑MaxSonar‑AE
  • XL‑MaxSonar‑WR
  • XL‑TrashSonar‑WR

Product Documentation

Part Numbers

All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.

M B 7 9 6 1 0 0 0
Base
Housing Style
0 Not Applicable
1 3/4″ NPS WR
2 3/4″ NPS WRC
3 Ultra Compact
4 Ultra Compact Flush Mount
5 1″ NPS
6 1″ BSPP
7 30MM 1.5
8 Extended Horn
Options Selected
0 No Options (Bagged)
1 F-Option
2 P-Option
3 F-Option and P-Option
4 No Options (Trayed)
5 TTL (Bagged)
6 TTL (Trayed)
Wire Attach
0 No Wire Attach
1 Wire Attached

The following table displays all of the active and valid part numbers for this product.

Active Part Numbers
MB7961-000