Mounting Hardware for our Outdoor Ultrasonic Sensors
| Pricing rules for MB7950 Mounting Hardware | |
| Quantity | Cost Per Unit |
|---|---|
| 5 - 9 | $3.00 |
| 10 - 49 | $2.70 |
| 50 | $1.80 |
The MB7950 Mounting Hardware is selected for use with our outdoor ultrasonic sensors. The MB7950 Mounting Hardware gives customers easy access to the hardware needed for through hole mounting. The mounting hardware includes a steel lock nut and two O-ring (Buna-N and Neoprene) each optimal for different applications.
This accessory is compatible with the following sensor lines that MaxBotix Inc., sells.
MB7950 Datasheet……………………MB7950 Mounting Hardware Datasheet
All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.
| M | B | 7 | 9 | 5 | 0 | – | 0 | 0 | 0 | ||||||||||
| Base | |||||||||||||||||||
| Housing Style | |||||||||||||||||||
| 0 | Not Applicable | ||||||||||||||||||
| 1 | 3/4″ NPS WR | ||||||||||||||||||
| 2 | 3/4″ NPS WRC | ||||||||||||||||||
| 3 | Ultra Compact | ||||||||||||||||||
| 4 | Ultra Compact Flush Mount | ||||||||||||||||||
| 5 | 1″ NPS | ||||||||||||||||||
| 6 | 1″ BSPP | ||||||||||||||||||
| 7 | 30MM 1.5 | ||||||||||||||||||
| 8 | Extended Horn | ||||||||||||||||||
| Options Selected | |||||||||||||||||||
| 0 | No Options (Bagged) | ||||||||||||||||||
| 1 | F-Option | ||||||||||||||||||
| 2 | P-Option | ||||||||||||||||||
| 3 | F-Option and P-Option | ||||||||||||||||||
| 4 | No Options (Trayed) | ||||||||||||||||||
| 5 | TTL (Bagged) | ||||||||||||||||||
| 6 | TTL (Trayed) | ||||||||||||||||||
| Wire Attach | |||||||||||||||||||
| 0 | No Wire Attach | ||||||||||||||||||
| 1 | Wire Attached | ||||||||||||||||||
The following table displays all of the active and valid part numbers for this product.
| Active Part Numbers |
| MB7950-000 |
Coats the aluminum transducer of our WR sensors in Parylene to help prevent corrosion. Select this option on the applicable product page to purchase.
View Product $40.00
Connects shielded cable to the pin-out below a sealed cap providing a full IP67 seal. Select this option on the applicable product page to purchase.
View Product $62.92
To ensure easy integration with the Radio Bridge interface, we provide a 5ft cable to connect your sensor to the LoRaWAN Bridge.
View Product
Used to help minimize spikes and noise found on the power supply to your devices.
View Product $2.25