MB7580 SCXL-MaxSonar-WRT

MB7580 SCXL-MaxSonar-WRT

From: $149.95

Ranges from 300mm to 5000mm with a 0.6Hz read rate. Pulse-width, analog voltage, and TTL serial. Reports range to closest target.

Clear

F-Option (IP68) * – optional

Yields a stronger seal for IP68 compliance and operation near harsh chemicals. Select this option on the applicable product page to purchase.

P-Option * – optional

Coats the aluminum transducer of our WR sensors in Parylene to help prevent corrosion. Select this option on the applicable product page to purchase.

Shielded Cable Attach * – optional

Connects shielded cable to the pin-out below a sealed cap providing a full IP67 seal. Select this option on the applicable product page to purchase.

Additional Wire Length – optional

(1ft = 1 Qty)

Description

The weather resistant SCXL-MaxSonar-WR self‑cleaning sensor is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings.

The MB7580 SCXL-MaxSonar-WRT self‑cleaning sensor is a cost-effective, rugged ultrasonic sensor designed for reliable reading to reading measurement. The MB7580 features a self-cleaning transducer to remove condensation and ice buildup when operating in cold conditions. The MB7580 is the recommended SCXL-MaxSonar-WRT self‑cleaning sensor for users unsure which sensor to use in their application when TTL serial is desired. The sensor accurately applies temperature compensation to every reading, using either the integrated temperature sensor or the optional external temperature sensor (HR-MaxTemp).

High output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The SCXL‑MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones.

MB7560 is the RS232 version of this sensor.
MB7586 is the 10 meter version of this sensor.

Models with additional chemical resistance are available

The F-Option (IP-68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP-68) when ordering.

Additional information

Reviews

There are no reviews yet.

Be the first to review “MB7580 SCXL-MaxSonar-WRT”

Your email address will not be published. Required fields are marked *