MB7480 4-20HR-MaxSonar-WRI

MB7480 4-20HR-MaxSonar-WRI

From: $199.95

Ranges from 500mm to 5000mm with 7.5Hz read rate. 20mA minimum range and 4mA maximum range. Reports range to closest target.

Clear

F-Option (IP68) * – optional

Yields a stronger seal for IP68 compliance and operation near harsh chemicals. Select this option on the applicable product page to purchase.

P-Option * – optional

Coats the aluminum transducer of our WR sensors in Parylene to help prevent corrosion. Select this option on the applicable product page to purchase.

Shielded Cable Attach * – optional

Connects shielded cable to the pin-out below a sealed cap providing a full IP67 seal. Select this option on the applicable product page to purchase.

Additional Wire Length – optional

(1ft = 1 Qty)

Description

The weather resistant 4-20HR‑MaxSonar‑WR is a rugged, ultrasonic sensor component module that features the industry standard 4-20mA analog current interface. This outdoor sensor provides very short- to long- distance detection and ranging in a compact, robust PVC housing. This ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings.

High-output, acoustic power, combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The 4‑20HR‑MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones.

The MB7480 4-20HR-MaxSonar-WR sensor has an inverted 4-20mA signal where 20mA signifies that the sensor is reporting the minimum reported distance and 4mA signifies the maximum reported distance for the sensor.

MB7360 is the non 4-20mA version of this sensor line.
MB7389 is the most likely version of this sensor.

Models with additional chemical resistance are available

The F-Option (IP-68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F‑Option (IP-68) when ordering.

Additional information

Reviews

There are no reviews yet.

Be the first to review “MB7480 4-20HR-MaxSonar-WRI”

Your email address will not be published. Required fields are marked *