MB7334 HRXL-MaxSonar-WRS3

MB7334 HRXL-MaxSonar-WRS3

From: $149.95

Ranges from 500mm to 5000mm with a 6Hz read rate. Pulse-width, analog voltage, and RS232 serial. Reports range to closest target. Uses filtering to prevent rapid changes in readings. Filter resets at 2% window.

Clear

F-Option (IP68) * – optional

Yields a stronger seal for IP68 compliance and operation near harsh chemicals. Select this option on the applicable product page to purchase.

P-Option * – optional

Coats the aluminum transducer of our WR sensors in Parylene to help prevent corrosion. Select this option on the applicable product page to purchase.

Shielded Cable Attach * – optional

Connects shielded cable to the pin-out below a sealed cap providing a full IP67 seal. Select this option on the applicable product page to purchase.

Additional Wire Length – optional

(1ft = 1 Qty)

Description

The weather resistant HRXL-MaxSonar-WR is a rugged, ultrasonic sensor component module. This outdoor sensor provides very short- to long- distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings.

The MB7334 HRXL-MaxSonar-WRS is a cost-effective, rugged ultrasonic snow-depth sensor that is designed for reliable snow-depth measurement. The MB7334 has an internal filter that will reset to targets that are considered valid outside of a 2% distance to target window. This makes the sensor ideal for targets that occasionally move rapidly. The sensor accurately applies temperature compensation to every reading, using either the integrated temperature sensor or the optional external temperature sensor (HR-MaxTemp).

High-output, acoustic power, combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The HRXL‑MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones.

MB7344 is the TTL version of this sensor.

Models with additional chemical resistance are available

The F-Option (IP-68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP-68) when ordering.

Additional information

Reviews

There are no reviews yet.

Be the first to review “MB7334 HRXL-MaxSonar-WRS3”

Your email address will not be published. Required fields are marked *