MB7092 XL-MaxSonar-WRMA1

MB7092 XL-MaxSonar-WRMA1

From: $99.95

Ranges from 20cm to 765cm with a 10Hz read rate. Analog envelope, analog voltage, and RS232 serial. Reports range to largest target. Uses a stability filter.

Clear

F-Option (IP68) * – optional

Yields a stronger seal for IP68 compliance and operation near harsh chemicals. Select this option on the applicable product page to purchase.

P-Option * – optional

Coats the aluminum transducer of our WR sensors in Parylene to help prevent corrosion. Select this option on the applicable product page to purchase.

Shielded Cable Attach * – optional

Connects shielded cable to the pin-out below a sealed cap providing a full IP67 seal. Select this option on the applicable product page to purchase.

Additional Wire Length – optional

(1ft = 1 Qty)

Description

The XL-MaxSonar-WRMA1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications.

The weather resistant XL-MaxSonar-WRMA1 is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings.

High output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL‑MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones.

MB7052 is the pulse width output version of this sensor.
MB7070 is the standard version of this sensor.

Models with additional chemical resistance are available

The F-Option (IP68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP68) when ordering.

Additional information

Reviews

There are no reviews yet.

Be the first to review “MB7092 XL-MaxSonar-WRMA1”

Your email address will not be published. Required fields are marked *