High Performance Ultrasonic Precision Rangefinder

MB7072 Datasheet

MB7072 Beam Pattern
MB7078 - Compact Beam Pattern

Housing Option *

Clear

F-Option (IP68) * – optional ($40.00)

Yields a stronger seal for IP68 compliance and operation near harsh chemicals. Select this option on the applicable product page to purchase.

P-Option * – optional ($40.00)

Coats the aluminum transducer of our WR sensors in Parylene to help prevent corrosion. Select this option on the applicable product page to purchase.

Wire Attach Shielded Cable Attach Option

Shielded Cable Attach * – optional ($62.92)

Connects shielded cable to the pin-out below a sealed cap providing a full IP67 seal. Select this option on the applicable product page to purchase.

Additional Wire Length – optional ($3.00)

(1ft = 1 Qty)

Quantity:

Total:

Quantities > 25 may delay ship date up to 1 week.

Options with * may delay ship date up to 2 weeks.

Quantity	Cost Per Unit
Applicable for all variations of this product
5 - 9	$94.95
10 - 49	$89.95

Quantity	Cost Per Unit
For Ultra Compact Housing & 3/4″ NPS WRC Housing & 3/4″ NPS WR Housing
50 - 99	$76.51
100	$69.07

Quantity	Cost Per Unit
For 1″ BSPP Housing & 1″ NPS Housing
50 - 99	$78.01
100	$70.57

Quantity	Cost Per Unit
For 30MM 1.5 Housing
50 - 99	$79.51
100	$72.07

Description
Specs
Documentation
Part Numbers

Product Description

The MB7072 XL-MaxSonar-WRA1 offers an additional stability filter for all outputted range readings. This provides users with an extra layer of protection from noise and anomalous readings.

The weather resistant MB7072 XL-MaxSonar-WRA is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings.

High output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL‑MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones.

MB7062 is an pulse width output version of this sensor.
MB7070 is the standard version of this sensor.
MB7092 is an advanced filtered version of this sensor.

Models with additional chemical resistance are available

The F-Option (IP-68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP-68) when ordering.

Product Specifications

Resolution of 1 cm
10Hz read rate
42kHz Ultrasonic sensor measures distance to objects
RoHS Compliant
Read from all 3 select sensor outputs: Analog Voltage, Serial, Analog Envelope
Operates from 3.0-5.5V
Low 3.4mA average current requirement
Small, light weight module
Designed for easy integration into your project or product
Operational Temperature from -40˚C to +70˚C (-40˚F to +160˚F)
Real-time automatic calibration (voltage, humidity, ambient noise)
Firmware filtering for better noise tolerance and clutter rejection
200,000+ Hours Mean Time Between Failure
Weather Resistant (IP67), optional Chemical Resistant F-Option
Matches standard electrical 3/4-inch PVC pipe fittings for easy mounting (3/4″ National Pipe Thread Straight)
Additional stability filter rejects occasional anomalous readings
Analog envelope output for easy troubleshooting and signal processing
Maximum range of 765 cm (300 inches)
Long range, narrow detection zone
Volume Pricing (100 or more units): Contact MaxBotix Inc.

Product Documentation

Documents and Downloads

MB7072 Datasheet	XL-MaxSonar-WRA1-datasheet
Sensor Selection Guide	Sensor Selection Guide
XLWR Chaining Notes	XL-MaxSonar-WR Chaining
RoHS Conformity	RoHS Declaration of Conformity
CE Declaration of Conformity	CE Declaration of Conformity
Reliability Demonstration	MTBF Report
High Resolution Pictures	High Resolution Pictures.zip

Product 3D Models

Full Horn Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

Compact Horn Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

Ultra Compact

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

1″ BSPP Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

1″ NPS Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

30mm 1.5 Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

Ultra-Compact Horn Models

Full Horn Exterior Mounted Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

Full Horn Interior Flush Mounted Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

Compact Horn Exterior Mounted Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

Compact Horn Interior Flush Mounted Housing

Key Shot	IGES File	ACIS 7.0 File	Solid Works Part
STL File	STEP File	ParaSolid Part

Part Numbers

All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.

M	B	7	0	7	2	–	1	0	0
Base




Housing Style
0	Not Applicable
1	3/4″ NPS WR
2	3/4″ NPS WRC
3	Ultra Compact
4	Ultra Compact Flush Mount
5	1″ NPS
6	1″ BSPP
7	30MM 1.5
8	Extended Horn




Options Selected
0	No Options (Bagged)
1	F-Option
2	P-Option
3	F-Option and P-Option
4	No Options (Trayed)
5	TTL (Bagged)
6	TTL (Trayed)




Wire Attach
0	No Wire Attach
1	Wire Attached

The following table displays all of the active and valid part numbers for this product.

Active Part Numbers

MB7072-100	MB7072-101	MB7072-110	MB7072-111
MB7072-120	MB7072-121	MB7072-130	MB7072-131
MB7072-200	MB7072-201	MB7072-210	MB7072-211
MB7072-220	MB7072-221	MB7072-230	MB7072-231
MB7072-300	MB7072-320	MB7072-400	MB7072-420
MB7072-500	MB7072-501	MB7072-510	MB7072-511
MB7072-520	MB7072-521	MB7072-530	MB7072-531
MB7072-600	MB7072-601	MB7072-610	MB7072-611
MB7072-620	MB7072-621	MB7072-630	MB7072-631
MB7072-700	MB7072-701	MB7072-710	MB7072-711
MB7072-720	MB7072-721	MB7072-730	MB7072-731

The legacy part numbers MB7078 and MB7278 are now contained within MB7072 which is the base for all housing options on this product. To select a product with a legacy part number, select the desired housing option on the product with the appropriate base. Please review the following table for more information.

IF YOU BOUGHT	NOW BUY
Legacy Part Number	Base and Housing	Active Part Number
MB7078 – Compact	MB7072 in 3/4″ NPS WRC Housing	MB7072-2XX
MB7278 – Ultra Compact Flush Mount	MB7072 in Ultra Compact Flush Mount	MB7072-4XX
MB7078 – 1″ NPS	MB7072 in 1″ NPS Housing	MB7072-5XX
MB7078 – 1″ BSPP	MB7072 in 1″ BSPP Housing	MB7072-6XX
MB7078 – 30mm1.5	MB7072 in 30MM 1.5 Housing	MB7072-7XX

MB7072 XL-MaxSonar-WRA1