MB1222 I2CXL-MaxSonar-EZ2

Our industrial indoor ultrasonic sensor component module

Product Description

The I2CXL-MaxSonar-EZ sensors now feature an I2C bus. This allows for easy I2C integration and multisensor operation using a single bus.

The I2CXL‑MaxSonar‑EZ2 offers the best balance between wide or narrow beams and provides a good balance between small and large target detection. The I2CXL‑MaxSonar‑EZ2 works for nearly all indoor applications including: people detection, large‑target detection, long‑range detection, applications requiring high noise tolerance.

The sensor is small in size, yet the high output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and real-time noise rejection algorithms results in virtually noise free distance readings for most users. This holds true even in the presence of many of the various acoustic or electrical noise sources. The I2CXL‑MaxSonar‑EZ sensor line is factory calibrated to match the sensor beam patterns and provides a long range detection zone.

Product Specifications

  • Resolution of 1 cm
  • Up to 40Hz reading rate
  • Simple I2C bus interface
  • Easy control of multiple sensors
  • Control up to 127 sensors using two wires
  • 42kHz Ultrasonic sensor measures distance to objects
  • RoHS Compliant
  • Virtually no dead zone, objects closer than 20 cm range as 20 cm
  • Operates from 3.0-5.5V
  • Low 4.4mA average current requirement
  • Small, light weight module
  • Designed for easy integration into your project or product
  • Operational Temperature from 0C to +65C (32F to +149F)
  • Real-time automatic calibration (voltage, humidity, ambient noise)
  • Firmware filtering for better noise tolerance and clutter rejection
  • 200,000+ Hours Mean Time Between Failure
  • Balanced beam sensor
  • Quote Request Form: For orders greater than 100 sensors

Product Documentation

Documents and Downloads

MB1222 Datasheet I2CXL-MaxSonar-EZ2-datasheet
I2C QuickStart Guide Using an I2C-MaxSonar With an Arduino
Sensor Selection Guide Sensor Selection Guide
RoHS Conformity RoHS Declaration of Conformity
CE Declaration of Conformity CE Declaration of Conformity
Reliability Demonstration MTBF Report
High Resolution Pictures High Resolution Pictures.zip
Product 3D Models
These 3D model files will download with a different product name.
Key Shot IGES File ACIS 7.0 File Solid Works Part
STL File STEP File ParaSolid Part  

Part Numbers

All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.

M B 1 2 2 2 0 0 0
Base
Housing Style
0 Not Applicable
1 3/4″ NPS WR
2 3/4″ NPS WRC
3 Ultra Compact
4 Ultra Compact Flush Mount
5 1″ NPS
6 1″ BSPP
7 30MM 1.5
8 Extended Horn
Options Selected
0 No Options (Bagged)
1 F-Option
2 P-Option
3 F-Option and P-Option
4 No Options (Trayed)
5 TTL (Bagged)
6 TTL (Trayed)
Wire Attach
0 No Wire Attach
1 Wire Attached

The following table displays all of the active and valid part numbers for this product.

Active Part Numbers
MB1222-000 MB1222-040