MB1033 HRLV-MaxSonar-EZ3

High Performance Ultrasonic Rangefinder

Product Description

The HRLV‑MaxSonar‑EZ3 is a narrow beam sensor with good side object rejection. The HRLV‑MaxSonar‑EZ3 has slightly wider beam width than the MB1043 HRLV‑MaxSonar‑EZ4 which makes it a good choice for when the HRLV‑MaxSonar‑EZ4 does not have enough sensitivity for the application.

Product Specifications

  • Resolution of 1‑mm
  • 10Hz reading rate
  • Internal temperature compensation
  • Cost-effective solution where precision range-findings are needed
  • Sensor component allows users to lower the cost of their systems without sacrificing performance
  • 42kHz Ultrasonic sensor measures distance to objects
  • RoHS compliant
  • Read from all sensor outputs: Analog Voltage, RS232 or TTL Serial, and Pulse Width
  • Virtually no sensor dead zone, objects closer than 30 cm will typically range as 30 cm
  • Maximum range of 5000 mm (195 inches)
  • Tolerates outside noise sources
  • Operates from 2.5V-5.5V
  • Low 3.1mA average current requirement
  • Small, light weight module
  • Designed for easy integration into your project or product
  • Operational Temperature from -0C to +65C (+32F to +149F)
  • Real-time automatic calibration (voltage, humidity, ambient noise)
  • Option external temperature compensation HR‑MaxTemp
  • Firmware filtering for better noise tolerance and clutter rejection
  • Narrow beam and good side object rejection
  • Best for large object detection applications
  • Quote Request Form: For orders greater than 100 sensors

Product Documentation

Documents and Downloads

MB1033 Datasheet HRLV-MaxSonar-EZ3-datasheet
HRLV Chaining Chaining Application Guide
Quick Start Guide HRLV-MaxSonar-EZ Quick Start Guide
Sensor Selection Guide Sensor Selection Guide
RoHS Conformity RoHS Declaration of Conformity
CE Declaration of Conformity CE Declaration of Conformity
Reliability Demonstration MTBF Report
High Resolution Pictures High Resolution Pictures.zip
Product 3D Models
Key Shot IGES File ACIS 7.0
File
Solid Works Part
STL File STEP File ParaSolid
Part
 

Part Numbers

All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.

M B 1 0 3 3 0 0 0
Base
Housing Style
0 Not Applicable
1 3/4″ NPS WR
2 3/4″ NPS WRC
3 Ultra Compact
4 Ultra Compact Flush Mount
5 1″ NPS
6 1″ BSPP
7 30MM 1.5
8 Extended Horn
Options Selected
0 No Options (Bagged)
1 F-Option
2 P-Option
3 F-Option and P-Option
4 No Options (Trayed)
5 TTL (Bagged)
6 TTL (Trayed)
Wire Attach
0 No Wire Attach
1 Wire Attached

The following table displays all of the active and valid part numbers for this product.

Active Part Numbers
MB1033-000 MB1033-040 MB1033-050 MB1033-060